Recall Information

Description

The rear seatbelts on your vehicle may be inadequately attached due to improperly manufactured rear floor assemblies.

Safety Risk

If a rear seat belt detaches under loading, it will not adequately restrain an occupant in a crash, increasing the risk of injury.

Remedy

Ford Motor Company has authorized your dealer to repair both lh and rh rear buckle attachments with a thread repair kit. This service must be performed on all affected vehicles at no charge to the vehicle owner.

Next Steps

Description

On your vehicle, engine oil andor fuel vapor may leak and accumulate under the hood.

Safety Risk

Engine oil and or fuel vapor that accumulates near a sufficiently hot surface, may ignite resulting in an under hood fire, and increasing the risk of injury.

Remedy

Ford Motor Company has authorized your dealer to modify the front under engine shield and the active grille shutter system free of charge parts and labor.

Next Steps

Description

The side curtain airbags on your vehicle may not meet the performance requirements of fmvss 226 ejection mitigation for front-row passengers.

Safety Risk

A vehicle that does not comply with fmvss 226 increases the risk of injury in a crash.

Remedy

Parts are now available to repair your vehicle. Ford Motor Company has authorized your dealer to replace both side airbag curtains free of charge parts and labor.

Next Steps

Description

On your vehicle, if your brake controller gain is set to 0.5 or above, your brake lamps may illuminate while driving without pressing the brake pedal. This condition may occur with or without a trailer attached to the vehicle.

Safety Risk

This may result in unintended brake lamp illumination, increasing the risk of a crash. If a trailer equipped with electric or electric-over-hydraulic brakes is attached to the vehicle, the trailer brakes may also be unintentionally applied, causing the trailer load to feel heavier than normal.

Remedy

Ford Motor Company has authorized your dealer to update the anti-lock brake system ABS software free of charge labor.

Next Steps

Description

Our records indicate that your vehicle recently received an update to the hybrid powertrain control module hpcm software calibration. This hpcm software can result in a forced neutral condition while driving resulting in the vehicle coasting to a stop and automatically shifting to park, along with a wrench light, multiple warning messages in the instrument panel cluster and an audible chime. After shifting back into drive the vehicle will enter a limp home mode which provides limited torque at low speeds up to 30MPH.

Safety Risk

A loss of motive power can increase the risk of a crash.

Remedy

Ford Motor Company has authorized your dealer to update the powertrain control module pcm software free of charge parts and labor.

Next Steps

Description

According to fords records, the remedy software for safety recall 24S27 may not have been installed correctly during a prior dealership visit. Because the correct software may not have been installed on your vehicle, the underlying condition specified in safety recall 24S27 may still exist, and the body control module bcm may falsely detect a current overload on one or both taillamp circuits. If this occurs, one or both of the rear taillamps may stop functioning during a drive cycle.

Safety Risk

Taillamps that fail to illuminate can cause reduced visibility in dark conditions, which may increase the risk of a crash

Remedy

Software is available to repair your vehicle. Ford Motor Company has authorized your dealer to update the bcm software free of charge. Your dealer will also perform an additional verification process to ensure that the software has installed correctly on your vehicle.

Next Steps

Description

According to fords records, the remedy software for safety recall 24S50 may not have been installed correctly during a prior dealership visit. Because the correct software may not have been installed on your vehicle, the underlying condition specified in safety recall 24S50 may still exist, and the body control module bcm and powertrain control module pcm calibrations may be unable to detect a sudden change in the 12-VOLT battery state of charge during a drive cycle.

Safety Risk

If the bcm and pcm calibrations are unable to detect a sudden battery degradation during a drive, the vehicle may be unable to restart or may experience a stall while coming to a stop at low speed. The vehicle may also lose electrical accessories such as hazard lights or cause a loss of drive power increasing the risk of a crash.

Remedy

Software is available to repair your vehicle. Ford Motor Company has authorized your dealer to reprogram the powertrain control module pcm and body control module bcm free of charge. Your dealer will also perform an additional verification process to ensure that the software has installed correctly on your vehicle.

Next Steps

Description

According to fords records, the remedy software for safety recall 23S27 may not have been installed correctly during a prior dealership visit. Because the correct software may not have been installed on your vehicle, the underlying condition specified in safety recall 23S27 may still exist. On your vehicle, the engine could fail prematurely. In the event of an engine failure, significant quantities of engine oil andor fuel vapor may be released into the under-hood environment and may migrate to andor accumulate near ignition sources. Engine failure is expected to produce loud noises example metal-to-metal clank audible to the vehicles occupants. An engine failure will also result in a reduction in available engine power.

Safety Risk

Engine oil andor fuel vapor that accumulates near a combustible source may ignite, increasing the risk of a fire.

Remedy

Software is available to repair your vehicle. Ford Motor Company has authorized your dealer to update the powertrain control module pcm free of charge. Your dealer will also perform an additional verification process to ensure that the software has installed correctly on your vehicle.

Next Steps

Description

On your vehicle, the engine block heater element may overheat while the engine block heater system is plugged in.

Safety Risk

A short circuit in the engine block heater increases the risk of an underhood fire.

Next Steps

Description

On your vehicle, it may be possible an error in the SYNC software can cause SYNC system instability concerns andor a failure to preserve certain settings across ignition cycles. This may result in an intermittent blank image while in reverse or rear-view image remaining on display after reverse driving has ended. Other non-safety related symptoms may be present such as a black infotainment screen, incorrect language setting, andor potential inability to perform software updates.

Safety Risk

A rear-view camera that intermittently displays a blank image while in reverse can reduce the drivers view of what is behind the vehicle, increasing the risk of a crash. A rear-view camera that remains on after the backing event has ended can distract the driver, increasing the risk of a crash.

Remedy

Software is now available to repair your vehicle. Ford Motor Company has authorized your dealer to update the SYNC software on your vehicle free of charge.

Next Steps

Description

On your vehicle, an underbody insulator may loosen and contact the aluminum driveshaft, resulting in marking or scoring of the driveshaft. Continued contact may result in driveshaft fracture.

Safety Risk

A fractured driveshaft poses the risks of loss of motive power while driving, unintended vehicle movement while the vehicle is in park if the parking brake is not applied, and secondary damage to surrounding components. A fractured driveshaft may also contact the ground which may cause loss of control of the vehicle while driving. A fractured driveshaft increases the risk of injury or crash.

Remedy

Ford Motor Company has authorized your dealer to secure the underbody insulator and inspect the driveshaft for damage and repair as necessary free of charge parts and labor.

Next Steps

Description

On your vehicle, it may be possible for aged biodiesel deposits to accumulate in the high pressure fuel pump. This may result in extended cranking without starting while the vehicle is parked, or loss of motive power while driving.

Safety Risk

This may result in a loss of motive power, which increases the risk of a crash.

Next Steps

Description

On your vehicle, the rear-view camera could have intermittent rearview video image, no rearview video image, or poor image quality blurry, foggy, hazy when the vehicle is in reverse gear.

Safety Risk

A rear-view camera that intermittently displays a blank or distorted image may reduce the drivers view of what is behind the vehicle, increasing the risk of a crash.

Remedy

Parts are now available to repair your vehicle. Ford Motor Company has authorized your dealer to replace the rear-view camera free of charge.

Next Steps

Description

On your vehicle, the infotainment screen may freeze followed by a black screen and a system reboot. If this occurs during a backing event, the rear-view image may be frozen, missing, or delayed.

Safety Risk

A frozen rear-view camera display image while in reverse can reduce the drivers view of what is behind the vehicle, increasing the risk of a crash.

Remedy

Software is now available to repair your vehicle. Ford Motor Company has released software for 25S49. Your vehicle is capable of Ford software updates. When automatic updates are turned on standard from the factory, the software will be downloaded to your vehicle over a private wi-fi network or through your vehicles modem through the cellular network. Before the software is installed you will have to schedule a day and time when you will not need the vehicle for up to 8 hours while the installation is completed. Note refer to ford.comsupport for further information on your Ford software updates system. Should the software fail to load or install properly, Ford has authorized your dealer to install 25S49 software free of charge under the terms of this program.

Next Steps

Description

On your vehicle, it may be possible for the rear-view camera image to become dark in specific reversing scenarios when using the 360-DEGREE camera feature while the front andor side cameras are exposed to significantly more light than the rearview camera. An example can be reversing your vehicle into a darkened garage from a sunlit area.

Safety Risk

This may result in poor camera visibility when reversing, increasing the risk of a crash.

Next Steps

Description

The trailer brake controller on your vehicle may not properly apply the trailer brakes when towing a trailer equipped with an electric or electric-over-hydraulic brake system.

Safety Risk

This may result in no trailer brake function while driving, loss of trailer brakes, and extended stopping distances possibly resulting in a crash.

Next Steps

Description

On your vehicle, the engine could fail prematurely. In the event of an engine failure, significant quantities of engine oil andor fuel vapor may be released into the under-hood environment and may migrate to andor accumulate near ignition sources. Engine failure is expected to produce loud noises example metal-to-metal clank audible to the vehicles occupants. An engine failure will also result in a reduction in available engine power.

Safety Risk

Engine oil andor fuel vapor that accumulates near a combustible source may ignite, increasing the risk of a fire.

Remedy

Parts andor software are now available to repair your vehicle. Ford Motor Company has authorized your dealer to update the powertrain control module for 2020-2022 escape and 2021-2022 corsair or replace the engine long-block assembly for 2023 model year corsair and escape vehicles, free of charge parts and labor.

Next Steps

Description

On your vehicle, the body control module bcm and powertrain control module pcm calibrations may be unable to detect a sudden change in the 12-VOLT battery state of charge during a drive cycle.

Safety Risk

If the bcm and pcm calibrations are unable to detect a sudden battery degradation during a drive, the vehicle may be unable to restart after an auto stopstart event or may experience a stall while coming to a stop at low speed. The vehicle may also lose 12-VOLT accessories, including hazard lights. A loss of motive power can increase the risk of a crash.

Remedy

Ford Motor Company has authorized your dealer to reprogram the powertrain control and body control modules free of charge software and labor.

Next Steps

Description

The body control module bcm was improperly calibrated and may falsely detect a current overload on one or both taillamp circuits. If this occurs, one or both of the rear taillamps may stop functioning during a drive cycle.

Safety Risk

Taillamps that fail to illuminate can cause reduced visibility in dark conditions, which may increase the risk of a crash

Remedy

Ford Motor Company has authorized your dealer to update the bcm software free of charge parts and labor.

Next Steps

Description

According to fords records, certain 2022-2023 model year maverick vehicles may not have the remedy for compliance recall 24C01 installed correctly but were recorded as having received the repair successfully. Because the correct software update may not have been installed on these vehicles, the underlying condition specified in compliance recall 24C01 may still exist.

Safety Risk

Failure to illuminate the cluster display would render safety-related telltales and gauges, such as warning lights or the speedometer, unreadable in certain conditions. An instrument panel cluster ipc that does not clearly display critical safety information can increase the risk of a crash.

Remedy

Software is now available to repair your vehicle. Ford Motor Company has authorized your dealer to update the instrument panel cluster software free of charge parts and labor.

Next Steps

Description

According to fords records, the remedy software for safety recall 24S33 may not have been installed correctly during a prior dealership visit. Because the correct software may not have been installed on your vehicle, the underlying condition specified in safety recall 24S33 may still exist, and the hybrid powertrain control module hpcm software may result in a forced neutral condition while driving. As the vehicle coasts to a stop, the transmission will automatically shift to park. You can retain other functionality including power braking and power steering. Once you shift the vehicle back to drive, the vehicle will enter a limp home mode which provides limited torque at low speeds up to 30 mph.

Safety Risk

A loss of motive power can increase the risk of a crash.

Remedy

Software is available to repair your vehicle. Ford Motor Company has authorized your dealer to update the powertrain control module pcm software free of charge.

Next Steps

Description

According to fords records, the remedy software for safety recall 22C24 may not have been installed correctly during a prior dealership visit, because the correct software may not have been installed on your vehicle, the underlying condition specified in safety recall 22C24 may still exist, and if your brake controller gain is set to 0.5 or above, your brake lamps may illuminate while driving without pressing the brake pedal. This condition may occur with or without a trailer attached to the vehicle.

Safety Risk

This may result in unintended brake lamp illumination, increasing the risk of a crash. If a trailer equipped with electric or electric-over-hydraulic brakes is attached to the vehicle, the trailer brakes may also be unintentionally applied, causing the trailer load to feel heavier than normal.

Remedy

Software is now available to repair your vehicle. Ford Motor Company has authorized your dealer to update the anti-lock brake system ABS software free of charge labor.

Next Steps

Description

According to fords records, the remedy software for safety recall 24S24 may not have been installed correctly during a prior dealership visit. Because the correct software may not have been installed on your vehicle, the underlying condition specified in safety recall 24S24 may still exist. On your vehicle, the body control module bcm and powertrain control module pcm calibrations may be unable to detect a sudden change in the 12-VOLT battery state of charge during a drive cycle.

Safety Risk

If the bcm and pcm calibrations are unable to detect a sudden battery degradation during a drive, the vehicle may be unable to restart or may experience a stall while coming to a stop. The vehicle may also lose electrical accessories such as hazard lights or cause a loss of drive power increasing the risk of a crash.

Remedy

Software is available to repair your vehicle. Ford Motor Company has authorized your dealer to reprogram the bcm and pcm modules free of charge software and labor. Your dealer will also perform an additional verification process to ensure that the software has installed correctly on your vehicle.

Next Steps

Description

On your vehicle, it may be possible for the vehicle wiper arms to perform erratically. This condition can potentially lead to a wiper arm that becomes inoperable andor separated from the vehicle.

Safety Risk

A wiper arm that becomes inoperable andor separated from the vehicle can result in reduced visibility in certain conditions.

Remedy

Parts are now available to repair your vehicle. Ford Motor Company has authorized your dealer to replace the left and right front wiper arms as required free of charge parts and labor.

Next Steps

Description

On your vehicle, it is possible to have a loss of fuel pressure and flow from the fuel tank due to fuel pump failure. This can cause a lack of fuel delivery to the engine and result in an engine stall while driving.

Safety Risk

An engine stall while driving increases the risk of a crash.

Next Steps

Description

On your vehicle, the moonroof air deflector may become partially or fully detached. Prior to a full detachment, you may visually notice the air deflector separating from the front of the moonroof when opening or closing the moonroof. You may also hear wind noise or rattle noises if you are driving with the moonroof open.

Safety Risk

If the moonroof air deflector fully detaches while driving, this can create a road hazard for other road users, increasing the risk of a crash.

Remedy

Moonroof air deflector repair is now available to repair your vehicle. Ford Motor Company has authorized your dealer to repair your air deflector free of charge.

Next Steps

Description

Affected vehicles are equipped with front wheel hub extender retaining nuts that may be insufficiently tightened. Insufficiently tightened front wheel hub extender retaining nuts may result in separation of the wheel and wheel extender from the vehicle.

Safety Risk

Insufficiently tightened front wheel hub extender retaining nuts may result in front wheel and wheel extender detachment from the vehicle, increasing the risk of a crash. A wheel assembly that separates from a vehicle while driving may create a road hazard, increasing the risk of injury or crash.

Remedy

Ford Motor Company has authorized your dealer to perform an inspection to verify that both front hub extensions have been properly attached to the vehicle. If necessary, your dealer will replace the front hub assembly, hub extension and hub extension nuts on the left or right side of the front axle free of charge parts and labor. Your dealer is authorized to tow your vehicle to the dealership for repairs free of charge.

Next Steps

Description

Ford Motor Company Ford recall no. 23C41 certain 2022 2024 model year Ford maverick vehicles turn signal outage detection notification failure

Safety Risk

Vehicle operators will not receive the intended increase in flashing rate notification to alert them that a single rear turn signal bulb is out. If the vehicle does not meet fmvss 108 intensity requirements, the vehicle may not alert other road users of an upcoming turn or lane change, which can increase the risk of a crash.

Remedy

Ford Motor Company has authorized your dealer to update the body control module bcm software free of charge.

Next Steps

Description

The instrument panel cluster ipc may not properly illuminate telltales or gauges, regulated by certain fmvss requirements.

Safety Risk

Failure to illuminate the cluster display would render safety-related telltales and gauges unreadable in certain conditions. An ipc that does not clearly display critical safety information can increase the risk of a crash.

Remedy

Ford Motor Company has authorized your dealer to update the instrument panel cluster software free of charge parts and labor.

Next Steps

Description

It may be possible that your vehicle received an incomplete repair under safety recall 24S24

Safety Risk

If the 24S24 repair was not properly completed, the body control module bcm and powertrain control module pcm calibrations may be unable to detect a sudden battery degradation during a drive. The vehicle may be unable to restart or may experience a stall while coming to a stop at low speed. The vehicle may also lose electrical accessories such as hazard lights or cause a loss of drive power increasing the risk of a crash.

Remedy

Software is now available to repair your vehicle. Ford Motor Company has authorized your dealer to perform calibration updates to the bcm and pcm, free of charge parts and labor.

Next Steps

Description

On your vehicle, the 12-VOLT battery may experience internal weld andor cast-on-strap failures, which could lead to a sudden battery degradation while driving.

Safety Risk

If the battery suddenly degrades during a drive, your vehicle may be unable to restart after an auto stopstart event or experience a stall while coming to a stop at low speed. Either of these conditions may be accompanied by a loss of electrical accessories, including hazard lights. A loss of motive power can increase the risk of a crash.

Remedy

Parts are now available to repair your vehicle. Ford Motor Company has authorized your dealer to inspect and replace the 12V battery if necessary free of charge.

Next Steps

Description

On your vehicle, the strength of the drivers side airbag cover may be insufficient after high mileage extended time in the field.

Safety Risk

In the event of a crash necessitating deployment of the frontal airbags, a driver airbag could project a fragment or fragments of the airbag cover toward the occupants, increasing the risk of injury.

Remedy

Parts are now available to repair your vehicle. Ford Motor Company has authorized your dealer to replace the drivers side airbag module -free of charge parts and labor.

Next Steps

Description

Our records indicate that your vehicle recently received an update to the hybrid powertrain control module hpcm software calibration. This hpcm software can result in a forced neutral condition while driving resulting in the vehicle coasting to a stop and automatically shifting to park, along with a wrench light, multiple warning messages in the instrument panel cluster and an audible chime. After shifting back into drive the vehicle will enter a limp home mode which provides limited torque at low speeds up to 30MPH.

Safety Risk

A loss of motive power can increase the risk of a crash.

Remedy

Ford Motor Company has authorized your dealer to update the powertrain control module pcm software free of charge parts and labor.

Next Steps

Description

On your vehicle, it may be possible for you to experience a frozen rear view camera display image while in reverse.

Safety Risk

This may result in a false representation of where the vehicle is relative to its surroundings, increasing the risk of a crash.

Remedy

Ford Motor Company has authorized your dealer to update the audio control module software free of charge.

Next Steps

Description

According to fords records, the remedy software for compliance recall 23C41 may not have been installed correctly during a prior dealership visit. Because the correct software may not have been installed on your vehicle, the underlying condition specified in compliance recall 23C41 may still exist, and the turn signal outage detection system may not send a notification to the driver if only one of the two rear turn signal lamp bulbs on either side has failed.

Safety Risk

This may result in you being unaware of a turn signal bulb failure, which may not alert other road users of an upcoming turn or lane change, increasing the risk of a crash.

Remedy

Software is available to repair your vehicle. Ford Motor Company has authorized your dealer to update the body control module bcm software free of charge. Your dealer will also perform an additional verification process to ensure that the software has installed correctly on your vehicle.

Next Steps

Description

According to fords records, the remedy software for safety recall 22S17 may not have been installed correctly during a prior dealership visit-. Because the correct software may not have been installed on your vehicle, the underlying condition specified in safety recall 22S17 may still exist, and the trailer brake controller on your vehicle may not properly apply the trailer brakes when towing a trailer equipped with an electric or electric-over-hydraulic brake system.

Safety Risk

This may result in no trailer brake function while driving, loss of trailer brakes, and extended stopping distances possibly resulting in a crash.

Remedy

Software is available to repair your vehicle. Ford Motor Company has authorized your dealer to reprogram the trailer brake controller free of charge. Your dealer will also perform an additional verification process to ensure that the software has been installed correctly on your vehicle.

Next Steps

Description

2022 super duty; 2021 F-150; 2021 navigator expedition side crash impact sensor damage open

Safety Risk

A vehicle with a damaged front door side impact pressure sensor module may not properly respond to a side impact event. This could lead to a degradation or loss of side impact airbag protection in a crash, increasing the risk of injury.

Remedy

Ford Motor Company has authorized your dealer to replace both front door side impact sensors free of charge parts and labor.

Next Steps

Description

On your vehicle, it may be possible that the safety certification label, located on the driver-side door jamb, is missing the tire size, rim size, and tire pressure information.

Safety Risk

This may result in an incorrect tire, rim, and tire pressure combination being installed on the vehicle, increasing the risk of a crash.

Remedy

Ford Motor Company has authorized your dealer to replace the safety certification label on your vehicle, free of charge parts and labor.

Next Steps

Description

On your vehicle, the supplemental owners guide does not include an accurate description of all head restraints and instructions for adjusting or removing certain center head restraints

Safety Risk

Customers do not have access to an accurate description of all head restraints and instructions for adjusting or removing certain center head restraints. Inability to access this information increases the risk of injury in the event of a crash.

Remedy

Ford Motor Company has provided an addendum, with the owner notification letter, that includes an accurate description of all head restraints and describes how to adjust and remove the head restraints for certain center seating positions. Please place the head restraint owners manual addendum provided with this letter in your vehicles glovebox with the supplemental owners guide. You do not need to visit your dealer, but you have the option to take your vehicle to a Ford or Lincoln dealer for assistance with properly installing the mailed owners manual addendum into your vehicles glovebox, free of charge parts and labor.

Next Steps

Campaign:

22E02

Description

Particulate matter sensor installation

Next Steps

Campaign:

23E01

Description

2020-22 3.0L6.7L diesel nox sensors missing preheat

Next Steps

Campaign:

23E07

Description

Software calibration update

Next Steps

Campaign:

23E09

Description

Reprogram powertrain control module

Next Steps

Campaign:

22E05

Description

Powertrain control module calibration for particulate matter sensor

Next Steps

Campaign:

22E04

Description

Reprogram powertrain control module pcm transmission control module tcm

Next Steps

Campaign:

25E09

Description

22E02 software remedy audit

Next Steps

Campaign:

22B38

Description

Transmission replacement

Next Steps

Campaign:

23L04

Description

Vehicle emissions control information veci label update

Next Steps

Campaign:

25N09

Description

Front halfshaft replacement

Next Steps

Campaign:

25L02

Description

Transmission control assembly reimbursement

Next Steps

Campaign:

22G05

Description

Exterior badge installation program 22G05 - certain 2022 model year F-150 and super duty vehicles - missing exterior badges are now available for no-cost installation

Next Steps

Campaign:

23B24

Description

Inspection of tailgate step handle and replacement

Next Steps

Campaign:

21B55

Description

8F35 transmission fluid overfill

Next Steps

Campaign:

23B34

Description

Install missing usb wire harness

Next Steps

Campaign:

24N04

Description

Replacement of exhaust gas heat recovery system if failed

Next Steps

Campaign:

21B72

Description

Transmission front support cover replacement

Next Steps

Campaign:

21M05

Description

Unintended tailgate opening

Next Steps

Campaign:

22H04

Description

2022 super duty steering i-shaft missing fastener

Next Steps

Campaign:

23P01

Description

2022 P558 Ford pass deep sleep message

Next Steps

Campaign:

24L03

Description

Particulate matter pm sensor reimbursement

Next Steps

Campaign:

24L04

Description

Emission control information label update

Next Steps

Campaign:

24L05

Description

Emission control information label update for qualified vehicles

Next Steps

Campaign:

25A20

Description

Administrative program for 25S49 for long term rental

Next Steps

Campaign:

22L03

Description

Engine horsepower credit

Next Steps

Campaign:

22P26

Description

Install missing floor mats

Next Steps

Campaign:

23A04

Description

Admin fsa for 23S27

Next Steps

Campaign:

22B39

Description

Maverick no-start condition

Next Steps

Campaign:

23N06

Description

Long block replacement

Next Steps

Campaign:

24N08

Description

Drivers side seat buckle replacement

Next Steps

Campaign:

24A05

Description

Administrative program for 23N06

Next Steps

Campaign:

25P28

Description

Ford passlincoln way connectivity concerns

Next Steps

Campaign:

22G03

Description

Repaint exterior components to match body color

Next Steps

Campaign:

25M01

Description

Nitrogen oxide nox sensor replacement

Next Steps

Campaign:

22L05

Description

Vehicle emissions control information label update

Next Steps

Campaign:

22B26

Description

Ercb unit with Motor controls disabled

Next Steps

Campaign:

22N05

Description

One-time replacement for diesel particulate filter assembly failures

Next Steps