Recall Information

Description

Ford is recalling certain model year 2010-2011 Ford fusion and mercury milan vehicles equipped with 17 inch steel wheels and built from April 1, 2009, through April 30, 2009, and from December 1, 2009, through November 13, 2010. The wheel studs may fracture, potentially causing a wheel to separate.

Safety Risk

While driving, multiple stud fractures could occur at the wheel location, and the operator may experience vehicle vibration and/or wheel separation, increasing the risk of a crash.

Remedy

Ford Motor Company has authorized your dealer to inspect all four wheels for broken wheel studs, inspect the rear rotor wheel mounting surface for flatness, and install redesigned lug nuts on all four wheels free of charge parts and labor.

Next Steps

Description

On certain pickup trucks and sport utility vehicles, if the intermediate shaft yoke separates from the steering gear input shaft, the steering system becomes disconnected.

Safety Risk

This could result in loss of steering control, potentially resulting in a vehicle crash without warning.

Remedy

Dealers will inspect the steering intermediate shaft yoke to determine if the yoke is fully seated on the steering gear input shaft. If the yoke is fully seated no service is required. If the yoke is not fully seated and bolt groove and spline is visible, the intermediate shaft and bolt will be replaced as well as the bolt at the steering column connection. Owner notification began on may 30, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact Ford at 1-866-436-7332.

Next Steps

Description

Ford is recalling model years 1995-2003 windstar, 2000-2003 excursion diesel, 1993-1997 and 1999-2003 F-250 sd through F-550 sd diesel, 1992-2003 E-150 through E-550, 1995-2002 explorer, 1997 and 2002 mercury mountaineer, 1995-1997 and 2001-2003 ranger, and 1994 F53 vehicles equipped with the texas instruments speed control deactivation switch (scds). The scds may leak internally and then overheat, smoke, or burn.

Safety Risk

A vehicle fire could occur with or without the engine running.

Remedy

Ford will notify owners that dealers will install a fused wiring harness in line with the scds. On 1999-2003 windstar vehicles with a leaking scds, dealers will also inspect the ABS control module connector and repair as necessary. Repairs will be completed free of charge. The safety recall began on October 27, 2009. Owners may contact Ford at 1-888-222-2751.

Next Steps

Description

Vehicle description: light duty pickup trucks manufactured at the kansas city or norfolk assembly plants. The front fuel line assembly could have a hole rubbed through in one of two locations. The first location is below the fuel rail connection where the flexible hose is crimped to the steel tube. The bracket that attaches the front fuel line to the transmission could have been bent during assembly. The second location is at the rear steel tube section forward of the rear bracket. During installation the rear steel tubes of the front fuel line assembly could have been bent downward. In vehicles equipped with a manual 4XZ4 transfer case shifter, the shifter linkage may contact the steel tubes as it is being shifted between 4H, 4L, 2L and neutral.

Safety Risk

This condition could result in fuel leakage. Fuel leakage in the presence of an ignition source could result in a fire.

Remedy

Dealers will inspect these lines and replace the front fuel line assembly if necessary. Owner notification began October 27, 2000. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact Ford at 1-866-436-7332.

Next Steps

Description

On certain sport utility vehicles and pickup trucks, the speed control deactivation switch may overheat, smoke, or burn.

Safety Risk

This condition could lead to a fire. Fires have occurred while the vehicles were parked with the ignition 'off.'

Remedy

Ford Motor Company has authorized your dealer to perform the repairs under this program free of charge parts and labor. If you had the interim repair speed control system disconnect performed, the final repair will restore operation of the speed control system.

Next Steps

Description

Ford is recalling certain 1997 through 2003 model year Ford F-150, 2004 model year Ford F-150 heritage, 1997 through 1999 model year F-250 less than 8,500 lbs. Gross vehicle weight rating - gvwr, and 2002 and 2003 Lincoln blackwood vehicles manufactured from June 20, 1995, through August 4, 2004, originally sold, or currently registered in, connecticut, delaware, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin, and the district of columbia. Prolonged exposure to road deicing chemicals may cause severe corrosion of the fuel tank straps which secure the tank to the vehicle.

Safety Risk

As a result of the corrosion, one or both straps may fail allowing the fuel lines to separate from the tank, or in some cases, causing the tank to contact the ground. Either scenario may result in a fuel leak presenting a fire hazard.

Remedy

Ford Motor Company has authorized your dealer to install either new fuel tank straps or a new fuel tank strap reinforcement kit. Both include additional corrosion protection and are provided free of charge parts and labor.

Next Steps

Description

Ford is recalling certain model year 2001-2002 escape vehicles manufactured from October 22, 1999, through July 19, 2002, equipped with a brake master cylinder reservoir cap that could leak brake fluid. If brake fluid leaks from the cap, it could come in contact with the antilock brake system - ABS module wiring harness connector.

Safety Risk

Corrosion can develop in the electrical connector leading to melting, smoke or a fire.

Remedy

Ford Motor Company has authorized your dealer to install a new redesigned master cylinder reservoir cap and a fused ABS relay. These repairs will be performed free of charge parts and labor.

Next Steps

Description

Certain passenger vehicles with four or five doors and originally sold in or currently registered in connecticut, delaware, illinois, indiana, iowa, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin, and the district of columbia, a build-up of corrosion at the pawl pivot area of the rear door latch can cause a binding condition of the pawl that may affect proper engagement of the pawl into the catch. The occupant may experience difficulty opening or closing a rear door, and eventually the rear door may not latch properly.

Safety Risk

If not latched properly, the door may open while the vehicle is in motion. If an occupant fell out of the vehicle, personal injuries could occur.

Remedy

Dealers will have a lower rocker seal added to the door and have the rear door latches evaluated free of charge. A latch that passes the evaluation will be lubricated to prevent future corrosion. A latch that does not pass the evaluation will be replaced. In addition, a sticker will be affixed to the rear doors advising the owners to use the recommended lubricant. The recall began on March 9, 2005. Owners may contact Ford at 1-866-436-7332.

Next Steps

Description

Vehicle description: mini vans, light pickup trucks, and sport utility vehicles. Off lease canadian vehicles equipped with daytime running lights which meet canadian requirements and not the photometric requirements of fmvss 108, "lamps, reflective devices, and associated equipment." according to Ford, the vehicles were imported into the u.s. Erroneously.

Safety Risk

The light given off from the daytime running lights is brighter than allowed by u.s. Standards.

Remedy

Dealers will be advised to deactivate the running light function and to complete any outstanding safety recalls on these vehicles.

Next Steps

Campaign:

98S18

Description

Rear spring clip installation

Next Steps

Campaign:

97S96

Description

Pcv modification

Next Steps

Campaign:

96S59

Description

4.6L pcv tube foam insulation sleeve - installation

Next Steps

Campaign:

96S53

Description

Brake pedal pushrod retainer - inspection

Next Steps

Campaign:

02E17

Description

Heater hose to fuel rail flex line

Next Steps

Campaign:

98S14

Description

Wheel attachment - lug nuts

Next Steps

Campaign:

99E03

Description

Fuel filler valve

Next Steps

Campaign:

7C441

Description

7C441 - air bag label - not to dealers

Next Steps

Campaign:

97S81

Description

Automatic transmission shift cable replacement

Next Steps

Campaign:

96S62

Description

Seat belt anchorage bolt - inspection/installation

Next Steps

Campaign:

97S86

Description

Automatic transmission shift cable retention

Next Steps

Campaign:

98R01

Description

Pcv tube foam insulation sleeve

Next Steps

Campaign:

98R04

Description

Pcv system modification

Next Steps

Campaign:

04L19

Description

Maintenance reminder letter

Next Steps