Last updated on 05/26/2026
Learn about any recalls and Ford's free repair service.
Your vehicle identification number, or VIN, is a 17-digit alphanumeric code. You can typically find it in these three locations:
1. The driver’s side doorframe.
2. The lower, driver’s side corner of your windshield - viewable from outside your vehicle.
3. Your vehicle’s point of purchase documents, insurance card and registration form.
Get recall details and quickly schedule service.
You can also for recalls on a vehicle.
Ask a question or search by keyword. If you need more, you can contact us.
Issue Date
2000-12-27
Campaign
00S58/00V422000
Description
Vehicle description: sport utility vehicles equipped with 4.0L sohc engines and still retain the original throttle body (part numbers 97JF-9E926AB or 97JF-9E926-AC). Some of the original throttle bodies installed allowed a gap between the plate and bore to be built too narrow. This reduced clearance allowed the engine deposits normally present in the throttle body to contact or bridge the gap. If the engine deposits bridged the gap between the throttle plate and bore and then hardened, on the initial application of the accelerator pedal after the engine has cooled, the operator would need to apply additional force to the accelerator pedal to break the bridge.
Safety Risk
This could result in engine surge when the accelerator pedal breaks free.
Remedy
Dealers will replace the original throttle bodies.
Next Steps
Contact your dealer for more information to schedule the free service.
Issue Date
2000-12-27
Campaign
00S58/00V422000
Description
Vehicle description: sport utility vehicles equipped with 4.0L sohc engines and still retain the original throttle body (part numbers 97JF-9E926AB or 97JF-9E926-AC). Some of the original throttle bodies installed allowed a gap between the plate and bore to be built too narrow. This reduced clearance allowed the engine deposits normally present in the throttle body to contact or bridge the gap. If the engine deposits bridged the gap between the throttle plate and bore and then hardened, on the initial application of the accelerator pedal after the engine has cooled, the operator would need to apply additional force to the accelerator pedal to break the bridge.
Safety Risk
This could result in engine surge when the accelerator pedal breaks free.
Remedy
Dealers will replace the original throttle bodies.
Next Steps
Contact your dealer for more information to schedule the free service.