How do I program my Ford's universal garage door opener?

Ford offers two different systems to open your garage door conveniently from your vehicle's visor. Programming instructions vary based on your vehicle's opener and your garage door system. For more information, refer below.

Identifying Your Ford Garage Door Opener

Use the following table to determine which transmitter your vehicle is equipped with.

Transmitter Type

Description 

Image 

Car2U®The transmitter has three buttons with a light above each button. 
2E54FA08-5697-4881-A329-0051A1ACF915.png
HomeLink®The transmitter has three buttons with a house-shaped icon with one light. 
28572A1C-CC0B-42B4-96D0-71AD0E116720.png

Programming Your Garage Door Opener 

Select your vehicle's transmitter from the drop-down options below to learn how to program it.

Car2U

Car2U garage door openers have specific programming instructions depending on whether your garage door system uses a rolling or fixed code system. A rolling code means your system generates a new security code every time the remote control is used to open your garage, whereas a fixed code always uses the same code. 

To determine which type of system you have, open the cover of your garage opener located on the back or side of the unit. If you see a circuit board, you have a rolling code system. If you see a series of small switches, you have a fixed code system. 

To view instructions on how to program your unit, select the appropriate video below.  

Rolling Code Transmitter 


Fixed Code Transmitter        

HomeLink

Select the appropriate video below based on your garage door opening system to view instructions on programming your HomeLink transmitter.  

Programming HomeLink with Most Garage Door Openers


Programming HomeLink with Genie Intellicode 2 Garage Door Openers


Programming HomeLink with Genie Intellicode Garage Door Openers