How do I recover my Backup Start Passcode for Phone As A Key™*?

If you have a Backup Start Passcode set up and your phone is not accessible (e.g. drained battery, lost, stolen, or broken), you can find the code inside your vehicle. Use the steps below for more information.

Important: 

• Your vehicle's SYNC^®** screen will be black upon entry. 
• If your phone is not accessible, the passcode will not show up when you press your brake and start button. 
• Your Customer Connectivity Settings must have previously been enabled. If your Customer Connectivity Settings were not turned on when you created your backup start passcode, or if you are not sure, contact a Guide for additional assistance. 

Recovering Your Backup Start Passcode

1. Safely enter your vehicle.
   
   Note: Avoid pressing the start button until directed to do so.
    
2. Slowly pump your vehicle's brakes to wake the SYNC screen.
3. Push down and hold the brake for a few seconds.
4. Release the brake and wait 15 seconds.
5. Push down and hold the brake pedal, push the start button, then release the brake pedal.  

Within 1-2 minutes, your SYNC screen should display the Backup Start Passcode screen.

If the troubleshooting steps are unsuccessful, contact a Guide for further assistance.

Additional Information

How do I use my backup code to start my vehicle?

*Feature is available on select vehicles. Features may vary based on model year, trim, options, packages, and supply availability. Use the Build and Price tool to view feature availability on current models. If you have questions or need more information, reference your Owner’s Manual or contact your Ford Dealer. 

**Don’t drive while distracted. Use voice-operated systems when possible; don’t use handheld devices while driving. Some features may be locked out while the vehicle is in gear. Not all features are compatible with all phones.